Work instructions of common wallpaper
1. The wall surface should be flat, smooth, clean, and dry with identical colour and luster, and kept moisture-proof so as not to stain the wallpaper.
2. Select high-quality gelatine powder exclusively for wallpaper and mix in appropriate proportion in accordance with the instructions.
3. The wallpaper doesn’t need to be soaked in water. Just brush the blended glue liquor evenly on the back of the wallpaper and have it immersed for 10 minutes before it is prepared for being attached to the wall.
4. When the surface of the wall is brushed evenly with gum, the prepared wallpaper can be attached to it. Scratched off the redundant glue after completion and clean the surface with towel. The working way of wallpaper is in accordance with the requirements in sample booklet. Generally, the effect of natural coloured wallpaper will be more ideal if worked on the front as well as the back.
5. When applying the wallpaper of same lot number to the same piece of wall, the wallpaper should be examined for color differences. If the their color shades are different, don’t cut them. Contact the suppliers, and keep all the labels for check later.
6. If problems occur during the work, immediately stop working and contact the suppliers so as to take appropriate measures. Trademark label and delivery note should be presented when asking for compensation, otherwise the complain will not be accepted.
* Compensation will be refused in the following situations:
a. Problems resulting from misuse use.
b. The user continure working without permission after finding the quality problems, or fails to contact the supplier within ten days.
c. Usually the color shades difference can be detected in the second volume. Therefore, the compensation of worked wallpaper should be within two volumes.

 Work instruction of gold foil wallpaper
So as not to affect the mounting effect resulting from the destruction of the surface of the gold foils, don’t scratch or press the gum with hard plastic strike-off board. Just squeeze out the glue softly with clean sponge or towel and clean it. The others are the same as those in common wallpaper work. 
 

  Work instructions of particle wallpaper
The concept of particle wallpaper: on the basis of common wallpaper, special techniques are adopted to naturally distribute environmental protecting particles on the surface of the wallpaper, thus breaking through the limit of wallpaper material and becoming the particle wallpaper with natural style.
1. The wall surface should be flat, smooth, clean, and dry with identical colour and luster. It should also be kept leak-resistant, moisture-proof and water-resistant, otherwise the wallpaper will fall off for long-term moisture of the wall.
2. Select high-quality gelatine powder and seriflux exclusively for wallpaper, and blend them into glue liquid according to the instructions on package. The quality of gum powder and seriflux will directly influence the working quality of the wallpaper and the overall effect.
3. Don’t immerse the wallpaper into water before mounting, otherwise the two-ply paper will come unattached to each other and the posting fastness between the wallpaper and the wall will also be affected. Just brush the blended glue liquid on the back of the wallpaper without making any of the glue into the surface of the particle wallpaper (because the surface with particle is not even, it’s difficult to clean the gum among the particles.), fold the wallpaper brushed with glue (after being folded, the parts having been brushed with gum should be face to face) and post it on the wall after 15 minutes. Brush the wallpaper smooth with hair brush or soft cloth to eliminate the air bubbles, making it attached to the wall closely.
4. Note: The production techniques of particle wallpaper are different from those of common wallpaper with gum surface, especially that the particles are of different forms carved by nature, which forms a natural style, thus there maybe some slight dislocation in splicing the designs of separate volumes. However, the overall pattern won’t be affected after the wall is dried.
5. When applying the wallpaper of same lot number to the same piece of wall, the wallpaper should be examined for color differences. If the their color shades are different, don’t cut them. Contact the suppliers, and keep all the labels for check later.

wallcovering manufacturer